How to use the welcome light?

The projection lamp that shines directly on the ground when the door is opened is actually called a welcome lamp. Its most important function is to have a beautiful effect and look very elegant. It can also be used for lighting fixtures to remind passers-by and vehicles to ensure safety. Generally speaking, the welcome light will be installed at the bottom of each car door. When the driver and the driver open the door to get into the car or turn off the fire to get out of the car, the welcome light will turn on. When the car door is closed, the welcome light will naturally go out.

Steps to use the welcome light

1. Prepare special tools required for installation in advance, such as augers and welcome lights for installation.
2. Remove the car door cover, and use an auger to drill a small round hole at a suitable position at the bottom of the car door cover.
3. Fix the welcome light on the door cover tightly. After fixing it, connect the power plug to the positive and negative of the door light to check whether everything is normal.
4. After checking that the welcome lights are working normally, just close the door cover tightly again.

It must be noted that when the car owner refits the welcome light, he must pay attention to sorting out the wiring. If the self-learning ability is not very strong and there are no special tools, then you can choose an adhesive welcome light, which can be directly pasted on the bottom of the door without disassembling the door to punch holes, which is very time-saving and labor-saving.

Another thing is that the power of the welcome lights purchased should not be too high. If it is too high, the power circuit will be easily damaged, and the fuse will be blown, which poses a certain safety risk.